Archives

Laminated gasket with a metal core, covered using soft conformable sealing materials on each face of the core is a Metal Reinforced Gasket falling in the range of up to pressure class 300. The solid metal core prevents gasket blowout by providing high strength and rigidity while the soft core accounts for exceptional gasket sealing.

• Metal Reinforced Gasket- FULL FACE TYPE
• Metal Reinforced Gasket- RAISED FACE TYPE

Download Data Sheet

PTFE gaskets with excellent chemical resistance and inherent cleanliness making the product a suitable sealing agent against aggressive media or feedstock contaminated areas. The presence of an adhesive backed strip eases the installation in large or complex flange applications, such as air conveying and solvent recovery systems Expanded PTFE gaskets are suitable for temperatures ranging up to 5000°F and for cryogenic applications. • Full Face Type • Raised Face

Download Data Sheet

Soft Gasket is a term used when referring to a gasket that is easily compressed under a low bolt load. Soft gaskets are used as heat exchanger gaskets, compressor and bonnet valve gaskets and in pipe flange applications
• Non Asbestos Gasket – Full Face
• Non Asbestos Gasket – Raised Face
• Non Asbestos Sheets
• Rubber Gasket – Full Face
• Rubber Gasket – Raised Face

Download Data Sheet

Monolithic Insulating Joint by Goodrich Gasket Pvt Ltd is a welded pre-fabricated 3-piece union applicable for pipeline electrical sectioning and commonly used when the cathodic protection is present to prevent any interference in corrosion control.
Monolithic Insulating Joints are identified by Pipe size; Pressure Class and the appropriate ASME standards (ASME VIII, Division I). Goodrich Gasket manufactures insulating joints from 1/2″ to 160″ diameter, ANSI 150# to 2500#, Grade B to X70.

Download Data Sheet

Kammprofile gaskets have a solid grooved metal core with soft conformable facing materials bonded on both sealing surface faces. The soft conformable facings with low initial stress assist on gasket seating and facing material gets trapped within the grooves minimizing flow or extrusion. • Style G – PN • Style G – ZG • Style G – ZA

Download Data Sheet

•Type R
•Type RIR
•Type CG
•Type CGI
•Type HE
•Type HE-CG
•Type HE-CGI
•Type CG-RJ
•Type M, MC, MCS
•Type T
•Type 625
•Carrier Ring

Download Data Sheet