• Frequency and Voltage Converers CM-Converters
• High Frequency Internal Vibrators With Built-In Converter – EWO
• Electric High Frequency Internal Vibrators – VHN
Download Data Sheet
• Vibro-Aerators – VB-series
• Rotary Roller Vibrators – OR
• Rotary Turbine Vibrators – OT
• Cushioned Pneumatic Vibrators – F
• Hydraulic Vibrator – MVO850
• Rotary Ball Vibrators – S
Download Data Sheet
• External Electric Motovibrators-MVE
• External Electric Motovibrators
• Explosion-Proof Range – MVE-D
• External Electric Motovibrators
Milling Range – MVE-Milling
Download Data Sheet
• Archimedean Screw Pumps
• Screens
• Clarifiers and Thickeners
• Grit Treatment Equipment
• Compact Pretreatment Plants
• Septage Receiving Stations
• Compactors
• Aggregate Reclaimers for Concrete Plants
Download Data Sheet
Download Data Sheet
• Level Monitoring Components
• Pressure Switches & Meters
• Silo Safety System Components
Download Data Sheet
Download Data Sheet
• Horizontal Single Shaft Mixers
• Ribbon Blenders
• Twin Shaft Paddle Mixers
• Dust Conditioners
• Laboratory Mixers
Download Data Sheet
• Round Dust Collectors
• Polygonal Dust Collectors
• Silo Venting Filters
• Hopper Venting Filters
• Fume and Dust Filters
Download Data Sheet
• Butterfly Valves
• Slide Valves
• Pinch Valves
• Diverter Valves
• Pressure Relief Valves
• Double Dump Valves
• Ball Segment Valves
• Actuators
Download Data Sheet
• Screw Conveyors & Feeders
• Micro-Batch Feeders
• Metering Feeders
• Live Bin Bottoms
• Bulk Biomass Conveying System
• Components
Download Data Sheet
• Safety Class: Ex ia IIC T4-T6 (Zone 0) • Material: Titanium / SS316 (NACE MR 0-175)
• Optional: Titanium / 6Mo
CERTIFICATIONS – CSA (US and Canada) Standard – Class I Division 1 – ATEX Standard: Nemko 07ATEX1160 – Gost R Certificate – Gost K Certificate
Download Data Sheet
• Power Supply: 24 VDC
Optional: Converter (20 – 32 VDC) (230/110 VAC 50/60 Hz) with Exd Enclosure
• Power Consumption: 13 W maximum
• Input Signal:
– Transit time: from ultrasonic transducers
– Pressure and Temperature: analogue 4-20 mA or HART interface
• Output Signal:
– 4-20mA analog output channels with selectable parameters
– RS 422 / 485 Serial Port based on Modbus protocol
Optional: HART, Pulse / frequency signal ,TCP/IP, Foundation Fieldbus
• Electrical classification: Explosion proof Ex de (ia) II C T6
• Ingressive Protection: IP66
• Measurement Parameters: Standard and actual volume flow, mass flow, speed of sound,flow velocity, molecular weight,standard and actual density.
Download Data Sheet
Download Data Sheet
Standard Fluenta FGM160 system includes a Field Computer and two Ultrasonic Transducers including ball valves and transducer holder nuts, bolts and gaskets for mounting and 10-meter transducer cables.
COMPONENTS
1: Ultrasonic transducers
2: Ball valves
3: Transducer holders
4: Field computer
Download Data Sheet
Download Data Sheet
The 1700 Maxiflow high-pressure safety valve is a premium product that is installed on a
majority of power generating stations worldwide to help protect boilers from overpressure conditions.
• Inlet Sizes: 1 1/2″ through 6″
• Inlet Ratings: ANSI Class 600 through 4500
• Outlet Sizes: 3″ through 10″ flanged
• Outlet Ratings: ANSI Class 150 and 300
• Orifice Sizes: Eleven sizes – 1 through RR
• Set Pressure Range: 100 psig to 5360 psig
• Temperature Range: Up to 1120°F
• Materials: Alloy and carbon steel cast body with stainless steel trim
• Certification: ASME Section I and VIII,PED and SQL
Download Data Sheet
Download Data Sheet
• 2 way,3 way and 5 way
• Direct and remote type
• Flanged,Screwed and EN std. connection
• Material: 1.4401 /1.4404/316316L
Download Data Sheet
• Threaded Seals
• Isolation Rings
• Flanged Seals
• High Displacement Low Pressure Applications
• In-line Seals
• All-welded Seals
• Sanitary Thermowells
Download Data Sheet
• Threaded Thermowells
• Flanged Thermowellss
• Socket Weld Thermowells
• Van Stone Thermowells
• Weld-in Thermowells
• Sanitary Thermowells
Download Data Sheet
• Pressure Transducer
• Industrial Pressure Transmitter
• Pressure Sensor
• Differential Pressure Transmitter
• Level Transducer
• Submersible Pressure Transmitter
Download Data Sheet
DIFFERENT TYPES OF FLANGE
• Tube Sheet
• Piston Rod
• Nozzle Neck
APPLICABLE STANDARD
• ASTM
• ASME
PRODUCTION RANGES
• Nozzle (30 Ton)
• Ring Flange (~5,000 mm)
• Tube Sheet (~4,500 mm)
AVAILABLE MATERIALS
• Carbon Steel (A105, A226CL2/CL4)
• Duplex (A182F51)
• Low Temp Carbon Steel (A350LF2,LF3)
• Lined Materials
• High Yield Carbon Steel (A694F52/60/65/70)
• Clad Materials
• Stainless Steel (A182F304/L,316/L,317,321,310,347)
• Alloy Steel (A182F1, F5, F9, F11, F12, F22, F91)
Download Data Sheet
DIFFERENT TYPES OF FLANGE
•Welding Neck Flange
•Slip On Fange
•Blind Flange
•rifice Flange
•Long Welding Neck Flange
•Nozzle Neck Flange
•Shell/Channel Flange
•WeldoFlange
•Square Flange
•Spectacle Flange
APPLICABLE STANDARD
• ANSI B16.5 (1/2″ ~ 24″)
• API 6B/6BX (1-11/16″~16-3/4″)
• MSS SP-44 (12″~60″)
• AWWA C207 (1/2″~96″)
• API 605 (26″~60″)
• BS 3293 (26″~48″)
• JIS (1/2″~60″)
• DIN, BS, AS
• Spectacle Flange
AVAILABLE MATERIALS
• ANSI B16.5 (1/2″ ~ 24″)
• API 6B/6BX (1-11/16″~16-3/4″)
• MSS SP-44 (12″~60″)
• AWWA C207 (1/2″~96″)
• API 605 (26″~60″)
• BS 3293 (26″~48″)
• JIS (1/2″~60″)
• DIN, BS, AS
• Spectacle Flange
Download Data Sheet
• Process Gauges
• Industrial Gauges
• Commercial Gauges
• Test Gauges
• Digital Gauges
• Differential Gauges
• Sanitary Gauges
Download Data Sheet
• Process Gauges
• Industrial Gauges
• Commercial Gauges
• Test Gauges
• Digital Gauges
• Differential Gauges
• Sanitary Gauges
Download Data Sheet
Tanged graphite gaskets range of graphite sheet sealing materials are manufactured from highly pure exfoliated graphite flake, with/without a reinforcing metallic core with the standard product offering graphite with a carbon content of 98% whiles for nuclear purposes its 99.85%.
Download Data Sheet
Download Data Sheet
Laminated gasket with a metal core, covered using soft conformable sealing materials on each face of the core is a Metal Reinforced Gasket falling in the range of up to pressure class 300. The solid metal core prevents gasket blowout by providing high strength and rigidity while the soft core accounts for exceptional gasket sealing.
• Metal Reinforced Gasket- FULL FACE TYPE
• Metal Reinforced Gasket- RAISED FACE TYPE
Download Data Sheet
Download Data Sheet
PTFE gaskets with excellent chemical resistance and inherent cleanliness making the product a suitable sealing agent against aggressive media or feedstock contaminated areas. The presence of an adhesive backed strip eases the installation in large or complex flange applications, such as air conveying and solvent recovery systems Expanded PTFE gaskets are suitable for temperatures ranging up to 5000°F and for cryogenic applications. • Full Face Type • Raised Face
Download Data Sheet
Download Data Sheet
Soft Gasket is a term used when referring to a gasket that is easily compressed under a low bolt load. Soft gaskets are used as heat exchanger gaskets, compressor and bonnet valve gaskets and in pipe flange applications
• Non Asbestos Gasket – Full Face
• Non Asbestos Gasket – Raised Face
• Non Asbestos Sheets
• Rubber Gasket – Full Face
• Rubber Gasket – Raised Face
Download Data Sheet
Download Data Sheet
Monolithic Insulating Joint by Goodrich Gasket Pvt Ltd is a welded pre-fabricated 3-piece union applicable for pipeline electrical sectioning and commonly used when the cathodic protection is present to prevent any interference in corrosion control.
Monolithic Insulating Joints are identified by Pipe size; Pressure Class and the appropriate ASME standards (ASME VIII, Division I). Goodrich Gasket manufactures insulating joints from 1/2″ to 160″ diameter, ANSI 150# to 2500#, Grade B to X70.
Download Data Sheet
Download Data Sheet
Kammprofile gaskets have a solid grooved metal core with soft conformable facing materials bonded on both sealing surface faces. The soft conformable facings with low initial stress assist on gasket seating and facing material gets trapped within the grooves minimizing flow or extrusion. • Style G – PN • Style G – ZG • Style G – ZA
Download Data Sheet
Download Data Sheet
•Type R
•Type RIR
•Type CG
•Type CGI
•Type HE
•Type HE-CG
•Type HE-CGI
•Type CG-RJ
•Type M, MC, MCS
•Type T
•Type 625
•Carrier Ring
Download Data Sheet
Download Data Sheet
Ring type joint gasket (RTJ Gasket) is a high integrity sealing gasket, high temperature and high pressure gasket for applications in petroleum industry, oilfield drilling, pressure vessels joints, pipes and valves etc
SERIES -STYLE
• Type R OVAL
• Type BX
• TYPE SBX
Download Data Sheet
Download Data Sheet
Manufacturing Standards
•DIN 16965 / 16966 AWWA C950
•ASTM 2310 / 2992 / 2996 BS 7159
•ISO 14692
•IS 12709 / 14402
•API•ABS
•PS 15-69
Diameter
• Min. 15 mm – Max. 4000 mm
Applications
• Chilled Water System
• Heating System
• Gas & Oils
• Industrial Applications
Advantages of ThermoShield Piping
•Corrosion Resistant
•UV Resistant
•Lightweight
•Maintenance free
•No Special Aluminum cladding required
•Can be pigmented to any color
•Thermal Insulation.
Download Data Sheet
•Hex cup screws
•Hex head screws
•Hex nuts
•Double ended stud bolts
•Anchor bolts
•Special bolts according customer drawing
•Hex plugs
Download Data Sheet
Download Data Sheet
•Pipe plain Ends
•Pipe with Bell and Spigot End.
•Pipe with Reka Coupling.
•Thermoplastic Lined (PVC, PP, CPVC, PVDF)
•FRP/GRP Pipes
Download Data Sheet
Download Data Sheet
The Texsteam MXG pump extends the first to market MX pneumatic technology with new low flow capabilities and fewer components to provide the most accurate and dependable product for your pneumatic driven injection needs.
Project Features
The spring-free design is easier to repair with no spring used in the pneumatic process,The pump incorporates differentiated needle valves to more accurately regulate the speed of the pump,ZERO BLEED* solution – the MXG is capable of 100% ex-haust capture, eliminating fugitive emissions
Download Data Sheet
Download Data Sheet
The Series 9000 Double Diaphragm Utility Pump is a double acting, positive displacement pump operated on either air or gas. A range of operating power pressures from 5 to 100 psig provide discharge volumes up to 60 gallons of water and discharge pressures up to 60 psig through 2” suction and discharge ports.It handles any liquid from alcohol to mud, liquids containing solids 1/4” in diameter with ease, and liquids containing abrasives with a minimum of wear. The 9000 can operate completely submerged. It is smokeless, quiet, and fireproof. This pump needs no priming for suction lifts up to 14 feet of water, and can perform suction lifts up to 23 feet when primed.
Download Data Sheet
Download Data Sheet
Texsteam’s 5100 Series Chemical Injectors are single acting, positive displacement plunger-type pumps, powered by gas via a diaphragm with a spring return. Speed control is accomplished by regulating the exhaust gas discharge flow.
Reversal is accomplished by a direct spring-actuated switching mechanism (rotary three-way valve). Volume is controlled by the speed of the pump and by the stroke length, either 1” (25.4 mm) or 1/3” (8.5 mm) lengths.
Download Data Sheet
Download Data Sheet
Texsteam Series 5000 chemical injection pumps are positive displacement units powered by an integral gas/air motor. These pumps fill the requirements of a broad range of applications because of their ability to achieve high discharge pressures (up to 12,000 psig) and wide volume ranges. A horizontal plunger and vertical check valve arrangement provide high operating efficiency.
Download Data Sheet
Download Data Sheet
Designed specifically for operation on a beam pumped oil well, the Texsteam Series 1200 Chemical Injection pumps are positive displacement type pumps powered by direct connection to the movement of a walking beam, rod line or rocker arm. The connection is made by a length of nominal pipe, or a wire line. The unit pumps on the upstroke of the beam action. On the downstroke, the injector arm returns to its set position. The ratchet mechanism is housed in a precision-bored, heavy cast gray iron case and is submerged in oil for long life.
Download Data Sheet
Download Data Sheet
Designed specifically for operation on a beam pumped oil well, the Texsteam Series 1200 Chemical Injection pumps are positive displacement type pumps powered by direct connection to the movement of a walking beam, rod line or rocker arm. The connection is made by a length of nominal pipe, or a wire line. The unit pumps on the upstroke of the beam action. On the downstroke, the injector arm returns to its set position. The ratchet mechanism is housed in a precision-bored, heavy cast gray iron case and is submerged in oil for long life.
Download Data Sheet
Download Data Sheet
Pressbolt supports the customers on the production of special pieces as per their own drawings, in all steel grades, thanks to advanced CNC machines.
Download Data Sheet
Pressbolt has developed also the manufacturing of hex plugs; Pressbolt can manufacture these plug as per Customer’s drawings and specifications, in different type of materials ( carbon/stainless steel and super alloys).
Download Data Sheet
To complete the range of customers’ requirements, Pressbolt supplies bolts (Hex head bolts, round head socket cap-screws) made of all type of materials.
Download Data Sheet
Pressbolt manufactures threaded anchor bolts – bent anchor bolts (plain finish and galvanized) as per Customer’s request in different diameters and materials.
Anchor bolts are supplied equipped with relevant nuts and washer as per Customer’s requirements.
Download Data Sheet
Pressbolt can supply any type of nut (hexagonal, cylindrical, spherical, as per drawing) to all kind of materials and from the smallest size (1/4” – M6) to the largest (7” – M180), in order to fit with relevant stud bolts/screws.
Download Data Sheet
studbolts-nuts-special fasteners
Pressbolt S.r.l. produces standard and special bolting (fully threaded stud bolts, nuts, bars, etc), special pieces manufactured to customer’s drawings. Standards; DIN ASTM, ASME, and UNI. Our customers counts on a wide range of 85.000 items ready on stock made of most common material like ASTM A193 B7,A320 L7,A193 B8,A193 B8M,A453 660,A182 F51,A182 F55 for stud bolts and corresponding materials for nuts. For more than 30 years Press bolt has been specializing in manufacturing stud bolts, nuts and special fastenersDownload Data Sheet
• 2″ NPT inlet and outlet standard
• Pilot operated design provides tight operating band
• Optional inlet and outlet connections available
• Inlet gas pressures from 40 PSIG to 130 PSIG
• Set points from -0.5 in.W.C. to 69.2 in.W.C.
• Optional flow plates to meet specific flow
requirements
• Fully field serviceable
• Optional pilot and sense line gauges
• System purge and field test capability available
• Conforms to the latest ATEX Directive
Download Data Sheet
Download Data Sheet
• Sizes 1″ through 4″(End line);
• Sizes 1″ (DN 25) through 12″ (DN 300)(Vent line)
• Listed by Underwriters Laboratories in 1″ and 2” sizes
• Suitable for use with vapors equivalent to NEC 500
Group D, IEC Group IIA
• Vertically mounted, parallel plate-type flame arrester
• Protects against fire
• Minimizes pressure drop under normal operating
conditions
• Easy inspection and maintenance
• Factory inspected prior to shipment
• Available in Aluminum and Stainless Steel
Download Data Sheet
Download Data Sheet
• Sizes 2″ (DN 50) through 24″ (DN 600)
• Settings achieved by weight loading
• Reduces costly evaporation losses
• Leakage rate of less than 1 SCFH of air at 90% of set point
• Patented, FEP film “Air-Cushioned Seating”
• Low-leak pallet design – certified test reports
• Conforms to the latest ATEX Directive
• Available in Aluminum, Stainless Steel, Carbon Steel,
and Alloy C / C27619800 – Pipe-Away Pressure Relief Vent
Download Data Sheet
Download Data Sheet
• Sizes 2″ (DN 50) through 12″ (DN 300)
• Conforms to the latest ATEX Directive
• Available in Aluminum, Ductile Iron, Stainless Steel,
Carbon Steel, and Alloy C / C276
SERIES -STYLE
9540 – End-of-Line Pressure/Vacuum Breather Vent
19540 – Pipe-Away Pressure/Vacuum Breather Vent
9240 – End-of-Line Vacuum Relief Vent
19240 – Side Mount Vacuum Relief Vent
9800 – End-of-Line Pressure Relief Vent
19800 – Pipe-Away Pressure Relief Vent
Download Data Sheet
Download Data Sheet
The JC Fully Welded Ball Valve gives it maximum strength at minimum weight as well as maximum resistance both to pipeline pressures and stresses. The compact, spherical design also eliminates body flanges, thus reducing overall size and leak paths.
JC welded body ball valves are used mainly in Gas transmission and distribution pipeline (Mid-stream), typical for underground and buried installation.
•Types: Full bore & Reduced bore
Download Data Sheet
Download Data Sheet
Bodies and covers are high quality cast and afterwards precisely machined, directing the attention to prevent stress concentration. The design characteristic of check valves is the unobstructed passageway, with a full-opening when required.
• Sizes: 2” to 36”
• Types: Bolted Bonnet & Pressure seal
• Materials :Body: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex,Special Alloys,… Other materials under request
TRIM: 316, 410, MONEL,… Other materials under request
Download Data Sheet
Download Data Sheet
The stems of JC globe valves are forged from one piece and ACME threaded, then
mechanized and finally provided with a smooth finishing in order to minimize friction.
• Sizes 2” to 16”
• Types :Bolted Bonnet & Pressure seal
• Class:150 to 2500
• Materials Body: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex,
Trim: 316, 410, MONEL,… Other materials under request
Download Data Sheet
Download Data Sheet
Gate valves serve as efficient on-off valves with flow in either direction. In such a design, a wedge slides cross a general passageway in order to control fluid flow (like a sliding gate – hence, the name).
• Bolted Bonnet (from Class 150 up to Class 2500 from 2’’ up to 36’’)
Materials:Body: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex,
Trim: 316, 410, MONEL
• Pressure Seal (from Class 900 up to Class 2500 from 2’’ up to 20’’)
Materials :Body: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex,
Trim: 316, 410, MONEL
Download Data Sheet
Download Data Sheet
A ball valve is a shut-off valve that controls the flow of a liquid or gas by means of a rotary ball having a bore. By rotating the ball a quarter-turn (90 degrees) around its axis, the medium can flow through or is blocked.
• Metal seated ball valves • Trunnion mounted ball valves • Floating ASME ball valves • Special constructions
• Floating 3-way ball valves • Monoblock valves • 3 piece forged ball valves • Semi-trunnion ball valves • Floating EN-DIN ball valves
Download Data Sheet
Download Data Sheet
The type 2900 pilot-operated safety relief valve combines the advantages of two products into one— the 1900 safety relief valve and the 3900 POSRV. The 2900 POSRV can replace spring-loaded relief valves without requiring modified outlet piping.
Specifications :
• Inlet Sizes: 1″ through 12″
• Outlet Sizes: 2″ through 16″
• Orifice Sizes: D through W
• Set Pressure Range: 15 to 6250 psig
• Temperature Range: -40°F to 505°F
• Materials: Stainless steel pilot with carbon steel main valve and SS trim
• Certification: ASME Section VIII, PED and SQL
Download Data Sheet
The type 3900 pilot-operated safety relief valve is a non-flowing design available in a modulating or pop-action pilot.The 3900 POSRV is suitable for the overpressure protection of many pressurized systems and vessels in the chemical, petrochemical, paper mill, oil and gas production and transmission
Specifications :
• Inlet Sizes: 1″ through 10″
• Outlet Sizes: 2″ through 10″
• Orifice Sizes: Fourteen sizes- D throughT
• Set Pressure Range: 15 to 6250 psig
• T emperature Range: -40°F to 505°F
• Materials: Stainless steel pilot with carbon steel main valve and SS Trim
• Certification: ASME Section VIII,PED and SQL
Download Data Sheet
The highly adaptable type 1900 safety relief valve meets numerous application requirements.The type 1900-UM valve is capable of flowing liquid, gas or steam with no adjustment required to switch between different media with the same set
pressure.
Specifications :
• Inlet Sizes: 1″ through 12″
• Inlet Ratings: ANSI Class 150 through 2500
• Outlet Sizes: 2″ through 16″
• Outlet Ratings: ANSI Class 150 and 300
• Orifice Sizes: D through W
• Set Pressure Range: 4 psig to 6250 psig
• Temperature Range: -450°F to 1500°F
• Materials: Cast carbon steel body with stainless steel trim
• Certification: ASME Section III and VIII, PED and SQL
Download Data Sheet
The type 19000 valve is ASME and PED certified. It meets and exceeds API seat tightness performance. The 19000 offers enhanced capacity and blowdown performance on many media types. In most cases, it does not require parts changes to
accommodate different media.
Specifications :
• Inlet Sizes: 1/2″ to 2″
• Outlet Sizes: 1″ through 2 1/2″
• Orifice Sizes: .019″ through .567″
• Set Pressure Range: 5 psig to 15000 psig
• Temperature Range: -425°F to 1100°F
• Certification: ASME Section III and VIII,PED and SQL
Download Data Sheet
Download Data Sheet
• Sizes :2-1/2” through 36” (65 mm through 900 mm)
• Working pressure : ASME Class 150, 2-1/2” through 36” (65 mm through 900 mm)
: ASME Class 300, 2-1/2” through 24” (65 mm through 600 mm)
: ASME Class 600, 3” through 12” (80 mm through 300 mm)
• Operating Temperatures: Up to 1000º F (538º C)
FEATURES AND BENEFITS
• Two Body Styles-Flangeless wafer and threaded lug styles are available.
• Heavy-duty Disc
• Thrust Bearing/Disc Spacer
• Internal Stop
• Deep Stuffing Box for Extended Life
• Lower Stem Disc Spring
• Disc Design Reduces Seat Wear
• Positively Retained Stem Prevents Blowouts
• Three Seat Designs
Download Data Sheet
Download Data Sheet
Provable zero-leakage, double block-and-bleed plug valve for oil and gas applications.
ADVANTAGES:
• Twin seal Valves hold with consistent zero-leakage
• Meter Stations
• Tank-Side Isolation Maintains Product Integrity
• Hydrant Isolation
• Fuel Loading Hazards are Eliminated
Download Data Sheet
Download Data Sheet
Cameron’s ORBIT® valves are ideal for applications when zero leakage and frequent
operation are demanded. They are used globally in gas processing plants using molecular
sleve systems in switching service.
STANDARD FEATURES:
• Single-seat Design
• Injectable Packing
• Top-entry Design
• Optimum Flow
• Dual Stem Guides
• Self-cleaning
• Low-torque Operation
• Wear-resistant Hard Facing on Core
Download Data Sheet
Download Data Sheet
The end-entry ball valve for oil and gas, and product pipelines is the choice for gas
distribution and other specialized applications.
FEATURES AND BENEFITS:
• Pressure-Actuated Seats
• Secondary Seat Sealant Injection
• Field Repairable
• Indicator Handle
• Positive Double Block-and-Bleed Operation
• Automatic Body Pressure Relief
• Fire-Tested for Safety
• Nace Trim Standard
Download Data Sheet
Download Data Sheet
• Suction Pads: Flat and Bellows Types.
• Ejectors: Basic, In-line and Compact Types.
• Accessories: Nipples, Spring Plungers.
Download Data Sheet
• Air Treatment: Filters, Regulators, Lubricators, FRL, Units, Accessories.
• Pressure Regulators
Download Data Sheet
• Solenoid Valves, Mechanical Valves, Manual Valves, Flow Control Valves, etc.
• Pressure Switches, Vacuum Switches, Silencers, Valve Islands.
• Proportional regulators, Servo Valves ,Flow Control,Servo Valve, Pressure Control.
Download Data Sheet
• Standard Cylinders, Steel Cylinders, Rotating, Cylinders, Cylinder Guides.
• Grippers – Angular & Parallel.
• Proximity Switches.
Download Data Sheet
Materials:
- Stainless steel: austenitic, including stabilized grades
- Martensitic steels
- Ferritic – austenitic steel
- High nickel alloys
- Manufacturers of seamless tubes by extrusion
- Free forging
- Ring rolling mill
- Flange manufacturers
- Roller manufacturers
- Mud pumps / Frack blocks
- Elbows and special components for large piping
- Rolled
- Forged
Through its subsidiaries IBF, Tubacex Taylor Accesorios (TTA) and Awaji Stainless, the Group manufactures curved sections and tube fittings in stainless steel, carbon steel and alloys.
TUBACEX range includes the design and manufacturing of welding fittings, curved sections, elbows, tees, reducers, caps (both seamless and welded), from standard to special products, manufactured using cold-drawn or bending processes to complement our extensive range of Tubular Solutions.
Tubacex Group comprehensive production program of special components and fittings is suitable for all types of projects and covers a wide dimensional range from 1/4” to 72”.
- Large OD & ID tubes
- Large OD & ID fittings
- Special components
- Machined components
Materials
- Mechanical tubes are manufactured in austenitic stainless steel, in particular 304,316, 316 Ti and Duplex.
- TUBACEX sells stainless steel mechanical tubes through TSS.
- ASTM
- ASME
- DIN
- EURONORM
- ISO
- More technical specifications are available upon request.
TUBACEX Group is mainly devoted to the manufacture and sale of seamless stainless steel and high-nickel alloy tubular solutions.Our product portfolio covers dimensional ranges from 3 mm to 219 mm (8”) OD, and up to 42” in the case of mechanical trepanning.
Materials
- Stainless steels: austenitics, including stabilized grades.
- Alloyed and martensitics steels.
- High Nickel alloys.
- Ferritic – austenitic: Duplex and Superduplex
- Hot-finished seamless stainless steel tubes.
- Cold-finished seamless stainless steel tubes.
- Welded and drawn pipes.
- Mechanical trepanning.
- Big OD Thin Wall Seamless Pipes.
- ASTM, ASME, DIN, EURONORM, ISO, BS, AFNOR, JIS, GOST
- More technical specifications are available upon request.
PRODUCT APPLICATION AREAS: Chillers, Air Conditioning, Refrigeration & Automobile Brake Lines
Alloys: Copper, Copper Nickel 95/5, 90/10, 80/20, 70/30
Related Standards: ASTM B 111, BS EN 12449, DIN 74234
Size range:OD: 4.76 mm to 22.00 mm WT: 0.30 mm to 1.50 mm
Download Data Sheet
Specialised Copper Alloy Wire & Rods Products
PRODUCT APPLICATIONS: Fasteners, Rivets, Jewelry, Spectacles, EDM Wires,
Musical Instruments, Electronic Items, Ship Building, Automobile, Nuts, Bolts,
Screws, Architectural Application
Related Standards: ASTM B 134/ EN 12166
Size Range:0.80 mm to 15.00 mm
Phosphor Bronze Alloys
PRODUCT APPLICATIONS: Springs, Plated Wire, Musical Instruments,Washers, Connectors, Plated Wire, Anchor Wire for tooth Brush
Related Standards:ASTM B 134/ EN 12166
Size Range:0.80 mm to 15.00 mm
Nickel Silver Alloys
PRODUCT APPLICATIONS: Springs, Relays, Musical Instruments, Measuring, Equipment, Ammunition, Electrical, Writing Instruments, Brazing
Related Standards:ASTM B 206/ ASTM B 151/ EN 12166
Size Range:0.80 mm to 15.00 mm
Download Data Sheet
Copper & Copper Alloy
Cast, Extruded and Drawn Semis (Hollows, Sections, Profiles and Rods.
Download Data Sheet
Download Data Sheet 
PRODUCT APPLICATION AREAS: Heat Exchangers, Condensers & Chillers.
Alloys: Copper, Copper Nickel 95/5, 90/10, 70/30, Admiralty Brass, Aluminium Brass
• Low Finned tubes
• Enhanced Surface Finned Tubes
Multimetals Manufacture the above two kinds of Finned Tubes with 19 & 26 fins per inch
Download Data Sheet
Copper Tubes
PRODUCT APPLICATION AREAS:
Defense, Refrigeration, Air conditioning, Plumbing, Engineering application,
Electrical conductors and Bus bars.
GUIDE TO SELECTION OF TUBE MATERIAL: Clear river, Lake or Canal water
a. Dissolved salts less than 500 ppm
b. Chloride less than 10 ppm
c. H2S or ammonia nil
d. Organic fats nil
e. Suspended solids less than 5 ppm
Permissible average velocity of water 0.8-1.0 meter / sec
Aluminium Brass Tubes
PRODUCT APPLICATION AREAS:
Heat Exchangers, Refineries Power Plants, Desalination Plants,
Ship Building & Ship Repairs, Condensers, Ferrules, Distillers.
GUIDE TO SELECTION OF TUBE MATERIAL: Clear river, Lake or Canal water -
a. Dissolved salts more than 2000 ppm
b. Chloride less than 20 ppm
c. H2S and Ammonia is less than 1 ppm
d. Suspended solids less than 25 ppm
e. For temperature more than 200 degree C and less than 450 degree C
Permissible average velocity of water 2.0 to 2.5 meter / sec
Download Data Sheet
• 496 Series Rotary Limit Switch
• Model 4411Electro-Pneumatic Transducer
• Model 78 Air Filter Regulator
• Model BR200 / BR400 High Capacity Volume Booster Relays
Download Data Sheet
• Characteristics:Linear or equal percentage obtained through the relevant cam setting.
• Options:bypass,customized characteristic
• Signals: 4 - 20 mA,split range; Action:Direct and reverse action
• Multi-lobe cam
• Simple zero and span adjustments
• Corrosion resistant materials
• Fully enclosed
• FM, CSA, ATEX approvals
Download Data Sheet
• Communication Platform:HART & FF
• Signal - Supply - Features:
• 4-20 mA control signal,Loop powered (9Vdc @ 20 mA)
• Supply pressure: 20 - 150 psi (1.4 - 10 bar)
• Operating Temperature:-40 °C to 85°C (-40°F to +185°F)
• Single or double-acting
• local or remote-mount capable
• Built diagnostics-in position transmitter and switches/push buttons
• Non-contact travel sensor
Download Data Sheet
• Communication Platform:HART
• Signal - Supply - Features:
• 4-20 mA control signal (ASD) 24 Vdc, (DSD), 4-20 mA and 24Vdc (4-wire device A/DSD)
• Supply pressure: 20 - 120 psi (1.4 - 8 bar)
• Operating Temperature:-40°C to 85°C (-40°F to +185°F)
• Single Acting
• Local, remote and automatic partial stroke test
• Local or remote-mount capable
• Built diagnostics-in position transmitter and switches/push buttons
Download Data Sheet
- Range: 14" through 120"(355 through 3048 mm)
- Ratings and Connections:1) flanged: ANSI 150 - 2500 UNI-DIN 10 – 100; Screwed: NPT-F (1 1/2", 2"); Welded
- Body Materials: Carbon steel, stainless steel, chrome-moly
- Displacer Materials: stainless steel, other materials on request
- Torque Tube Materials: lnconel, stainless steel, other materials on request
- Electronic lnstrument: HART protocol,4 - 20 mA signal ATEX, FM, FMc, JIS, GOST and CSA
• Sizes: 1" through 12"(25 through 300 mm)
• Ratings and Connections: Flanged: ANSI 600 - 2500 UNII-DIN 100 - 400;Welded: BW or SW
• Body Materials:Carbon steel,stainless steel chrome-moly
• Actuators: 1) Model 87 /88- multi-spring-opposed diaphragm or 51/52/53 Piston cylinder
• Trims:axial flow technology,multi-stage, cage-guided,anti-cavitation trim Class VI available on request
Download Data Sheet
- Sizes: 3" through 48" (80 through 1200 mm)
- Ratings: ASME CL150 - CL1500 Wafer and lug for mounting between flanges: ANSI 150-600
- Connections: Lugged, Raised Face Flanged, RTJ Optional
- Body Materials: Carbon steel, Stainless steel, Low Temperature Carbon Steel
- Trim: Triple Offset
- Seat Leakage: Class IV, Class V & VI (Optional)
• Designed with EF Seal (Emission Free Packing) with emissions rated less than 500ppm up to 750,000 cycles.
• Sizes: 1" to 16".
• Rating: Flanged: - ANSI 150 - 600; Flangeless: - ANSI 150- 600, UNI-DIN 10-100; Screwed: - NPT (1 through 2")
• Body: CS / SS / High Nickel Alloy
• Actuator: Model 35 spring diaphragm, 70 Series Cylinder
• Trim: Eccentric Rotary Plug
Download Data Sheet
- Meets demanding requirements of high-pressure drop applications and wide temperature fluctuations
- Sizes: 2" to 24"
- Rating: Flanged: ASME 150 – 2500 ; Welded: BW / SW ; Screwed: NPT 2"
- Body: CS/ SS / Chrome-Moly
- Actuator: Model 87 /88 multi-spring diaphragm & Piston cylinder actuators
- Trim: Balanced cage-guided Trim,Lo-dB , anti-cavitation, VRT trims, Single and multiple cages are available
- Well suited for control loops with typical service conditions.
- Sizes: 3/4" to 8".
- Rating: Flanged: ASME 150- 2500
- Connection type :Welded: BW / SW & Screwed: NPT 3/4" to 2"
- Body: CS / SS / Chrome-Moly
- Actuator: Model 87 /88 multi-spring diaphragm
- Trim: Single seat plug top guided.
- Lo-dB and anti-cavitation trims, single or double stage are available.
• Frequency and Voltage Converers CM-Converters
• High Frequency Internal Vibrators With Built-In Converter – EWO
• Electric High Frequency Internal Vibrators – VHN
Download Data Sheet
• Vibro-Aerators – VB-series
• Rotary Roller Vibrators – OR
• Rotary Turbine Vibrators – OT
• Cushioned Pneumatic Vibrators – F
• Hydraulic Vibrator – MVO850
• Rotary Ball Vibrators – S
Download Data Sheet
• External Electric Motovibrators-MVE
• External Electric Motovibrators
• Explosion-Proof Range – MVE-D
• External Electric Motovibrators
Milling Range – MVE-Milling
Download Data Sheet
• Archimedean Screw Pumps
• Screens
• Clarifiers and Thickeners
• Grit Treatment Equipment
• Compact Pretreatment Plants
• Septage Receiving Stations
• Compactors
• Aggregate Reclaimers for Concrete Plants
Download Data Sheet
• Level Monitoring Components
• Pressure Switches & Meters
• Silo Safety System Components
Download Data Sheet
• Horizontal Single Shaft Mixers
• Ribbon Blenders
• Twin Shaft Paddle Mixers
• Dust Conditioners
• Laboratory Mixers
Download Data Sheet
• Round Dust Collectors
• Polygonal Dust Collectors
• Silo Venting Filters
• Hopper Venting Filters
• Fume and Dust Filters
Download Data Sheet
• Butterfly Valves
• Slide Valves
• Pinch Valves
• Diverter Valves
• Pressure Relief Valves
• Double Dump Valves
• Ball Segment Valves
• Actuators
Download Data Sheet
• Screw Conveyors & Feeders
• Micro-Batch Feeders
• Metering Feeders
• Live Bin Bottoms
• Bulk Biomass Conveying System
• Components
Download Data Sheet
• Safety Class: Ex ia IIC T4-T6 (Zone 0)
• Material: Titanium / SS316 (NACE MR 0-175)
• Optional: Titanium / 6Mo
CERTIFICATIONS
– CSA (US and Canada) Standard – Class I Division 1
– ATEX Standard: Nemko 07ATEX1160
– Gost R Certificate
– Gost K Certificate
Download Data Sheet
• Power Supply: 24 VDC
Optional: Converter (20 – 32 VDC) (230/110 VAC 50/60 Hz) with Exd Enclosure
• Power Consumption: 13 W maximum
• Input Signal:
– Transit time: from ultrasonic transducers
– Pressure and Temperature: analogue 4-20 mA or HART interface
• Output Signal:
– 4-20mA analog output channels with selectable parameters
– RS 422 / 485 Serial Port based on Modbus protocol
Optional: HART, Pulse / frequency signal ,TCP/IP, Foundation Fieldbus
• Electrical classification: Explosion proof Ex de (ia) II C T6
• Ingressive Protection: IP66
• Measurement Parameters: Standard and actual volume flow, mass flow, speed of sound,flow velocity, molecular weight,standard and actual density.
Download Data Sheet
Standard Fluenta FGM160 system includes a Field Computer and two Ultrasonic Transducers including ball valves and transducer holder nuts, bolts and gaskets for mounting and 10-meter transducer cables.
COMPONENTS
1: Ultrasonic transducers
2: Ball valves
3: Transducer holders
4: Field computer
Download Data Sheet
The 1700 Maxiflow high-pressure safety valve is a premium product that is installed on a
majority of power generating stations worldwide to help protect boilers from overpressure conditions.
• Inlet Sizes: 1 1/2″ through 6″
• Inlet Ratings: ANSI Class 600 through 4500
• Outlet Sizes: 3″ through 10″ flanged
• Outlet Ratings: ANSI Class 150 and 300
• Orifice Sizes: Eleven sizes – 1 through RR
• Set Pressure Range: 100 psig to 5360 psig
• Temperature Range: Up to 1120°F
• Materials: Alloy and carbon steel cast body with stainless steel trim
• Certification: ASME Section I and VIII,PED and SQL
Download Data Sheet
• 2 way,3 way and 5 way
• Direct and remote type
• Flanged,Screwed and EN std. connection
• Material: 1.4401 /1.4404/316316L
Download Data Sheet
• Calibrators
• Hand Pumps and
• Controllers
• Hydraulic Testers
Download Data Sheet
• Threaded Seals
• Isolation Rings
• Flanged Seals
• High Displacement Low Pressure Applications
• In-line Seals
• All-welded Seals
• Sanitary Thermowells
Download Data Sheet
• Threaded Thermowells
• Flanged Thermowellss
• Socket Weld Thermowells
• Van Stone Thermowells
• Weld-in Thermowells
• Sanitary Thermowells
Download Data Sheet
• Pressure Transducer
• Industrial Pressure Transmitter
• Pressure Sensor
• Differential Pressure Transmitter
• Level Transducer
• Submersible Pressure Transmitter
Download Data Sheet
DIFFERENT TYPES OF FLANGE
• Tube Sheet
• Piston Rod
• Nozzle Neck
APPLICABLE STANDARD
• ASTM
• ASME
PRODUCTION RANGES
• Nozzle (30 Ton)
• Ring Flange (~5,000 mm)
• Tube Sheet (~4,500 mm)
AVAILABLE MATERIALS
• Carbon Steel (A105, A226CL2/CL4)
• Duplex (A182F51)
• Low Temp Carbon Steel (A350LF2,LF3)
• Lined Materials
• High Yield Carbon Steel (A694F52/60/65/70)
• Clad Materials
• Stainless Steel (A182F304/L,316/L,317,321,310,347)
• Alloy Steel (A182F1, F5, F9, F11, F12, F22, F91)
Download Data Sheet
DIFFERENT TYPES OF FLANGE
•Welding Neck Flange
•Slip On Fange
•Blind Flange
•rifice Flange
•Long Welding Neck Flange
•Nozzle Neck Flange
•Shell/Channel Flange
•WeldoFlange
•Square Flange
•Spectacle Flange
APPLICABLE STANDARD
• ANSI B16.5 (1/2″ ~ 24″)
• API 6B/6BX (1-11/16″~16-3/4″)
• MSS SP-44 (12″~60″)
• AWWA C207 (1/2″~96″)
• API 605 (26″~60″)
• BS 3293 (26″~48″)
• JIS (1/2″~60″)
• DIN, BS, AS
• Spectacle Flange
AVAILABLE MATERIALS
• ANSI B16.5 (1/2″ ~ 24″)
• API 6B/6BX (1-11/16″~16-3/4″)
• MSS SP-44 (12″~60″)
• AWWA C207 (1/2″~96″)
• API 605 (26″~60″)
• BS 3293 (26″~48″)
• JIS (1/2″~60″)
• DIN, BS, AS
• Spectacle Flange
Download Data Sheet
• Process Gauges
• Industrial Gauges
• Commercial Gauges
• Test Gauges
• Digital Gauges
• Differential Gauges
• Sanitary Gauges
Download Data Sheet
• Process Gauges
• Industrial Gauges
• Commercial Gauges
• Test Gauges
• Digital Gauges
• Differential Gauges
• Sanitary Gauges
Download Data Sheet
Tanged graphite gaskets range of graphite sheet sealing materials are manufactured from highly pure exfoliated graphite flake, with/without a reinforcing metallic core with the standard product offering graphite with a carbon content of 98% whiles for nuclear purposes its 99.85%.
Download Data Sheet
Laminated gasket with a metal core, covered using soft conformable sealing materials on each face of the core is a Metal Reinforced Gasket falling in the range of up to pressure class 300. The solid metal core prevents gasket blowout by providing high strength and rigidity while the soft core accounts for exceptional gasket sealing.
• Metal Reinforced Gasket- FULL FACE TYPE
• Metal Reinforced Gasket- RAISED FACE TYPE
Download Data Sheet
PTFE gaskets with excellent chemical resistance and inherent cleanliness making the product a suitable sealing agent against aggressive media or feedstock contaminated areas. The presence of an adhesive backed strip eases the installation in large or complex flange applications, such as air conveying and solvent recovery systems Expanded PTFE gaskets are suitable for temperatures ranging up to 5000°F and for cryogenic applications. • Full Face Type • Raised Face
Download Data Sheet
Soft Gasket is a term used when referring to a gasket that is easily compressed under a low bolt load. Soft gaskets are used as heat exchanger gaskets, compressor and bonnet valve gaskets and in pipe flange applications
• Non Asbestos Gasket – Full Face
• Non Asbestos Gasket – Raised Face
• Non Asbestos Sheets
• Rubber Gasket – Full Face
• Rubber Gasket – Raised Face
Download Data Sheet
Monolithic Insulating Joint by Goodrich Gasket Pvt Ltd is a welded pre-fabricated 3-piece union applicable for pipeline electrical sectioning and commonly used when the cathodic protection is present to prevent any interference in corrosion control.
Monolithic Insulating Joints are identified by Pipe size; Pressure Class and the appropriate ASME standards (ASME VIII, Division I). Goodrich Gasket manufactures insulating joints from 1/2″ to 160″ diameter, ANSI 150# to 2500#, Grade B to X70.
Download Data Sheet
Kammprofile gaskets have a solid grooved metal core with soft conformable facing materials bonded on both sealing surface faces. The soft conformable facings with low initial stress assist on gasket seating and facing material gets trapped within the grooves minimizing flow or extrusion. • Style G – PN • Style G – ZG • Style G – ZA
Download Data Sheet
•Type R
•Type RIR
•Type CG
•Type CGI
•Type HE
•Type HE-CG
•Type HE-CGI
•Type CG-RJ
•Type M, MC, MCS
•Type T
•Type 625
•Carrier Ring
Download Data Sheet
Ring type joint gasket (RTJ Gasket) is a high integrity sealing gasket, high temperature and high pressure gasket for applications in petroleum industry, oilfield drilling, pressure vessels joints, pipes and valves etc
SERIES -STYLE
• Type R OVAL
• Type BX
• TYPE SBX
Download Data Sheet
Manufacturing Standards
•DIN 16965 / 16966 AWWA C950
•ASTM 2310 / 2992 / 2996 BS 7159
•ISO 14692
•IS 12709 / 14402
•API•ABS
•PS 15-69
Diameter
• Min. 15 mm – Max. 4000 mm
Applications
• Chilled Water System
• Heating System
• Gas & Oils
• Industrial Applications
Advantages of ThermoShield Piping
•Corrosion Resistant
•UV Resistant
•Lightweight
•Maintenance free
•No Special Aluminum cladding required
•Can be pigmented to any color
•Thermal Insulation.
Download Data Sheet
•Hex cup screws
•Hex head screws
•Hex nuts
•Double ended stud bolts
•Anchor bolts
•Special bolts according customer drawing
•Hex plugs
Download Data Sheet
•Pipe plain Ends
•Pipe with Bell and Spigot End.
•Pipe with Reka Coupling.
•Thermoplastic Lined (PVC, PP, CPVC, PVDF)
•FRP/GRP Pipes
Download Data Sheet
The Texsteam MXG pump extends the first to market MX pneumatic technology with new low flow capabilities and fewer components to provide the most accurate and dependable product for your pneumatic driven injection needs.
Project Features
The spring-free design is easier to repair with no spring used in the pneumatic process,The pump incorporates differentiated needle valves to more accurately regulate the speed of the pump,ZERO BLEED* solution – the MXG is capable of 100% ex-haust capture, eliminating fugitive emissions
Download Data Sheet
The Series 9000 Double Diaphragm Utility Pump is a double acting, positive displacement pump operated on either air or gas. A range of operating power pressures from 5 to 100 psig provide discharge volumes up to 60 gallons of water and discharge pressures up to 60 psig through 2” suction and discharge ports.It handles any liquid from alcohol to mud, liquids containing solids 1/4” in diameter with ease, and liquids containing abrasives with a minimum of wear. The 9000 can operate completely submerged. It is smokeless, quiet, and fireproof. This pump needs no priming for suction lifts up to 14 feet of water, and can perform suction lifts up to 23 feet when primed.
Download Data Sheet
Texsteam’s 5100 Series Chemical Injectors are single acting, positive displacement plunger-type pumps, powered by gas via a diaphragm with a spring return. Speed control is accomplished by regulating the exhaust gas discharge flow.
Reversal is accomplished by a direct spring-actuated switching mechanism (rotary three-way valve). Volume is controlled by the speed of the pump and by the stroke length, either 1” (25.4 mm) or 1/3” (8.5 mm) lengths.
Download Data Sheet
Texsteam Series 5000 chemical injection pumps are positive displacement units powered by an integral gas/air motor. These pumps fill the requirements of a broad range of applications because of their ability to achieve high discharge pressures (up to 12,000 psig) and wide volume ranges. A horizontal plunger and vertical check valve arrangement provide high operating efficiency.
Download Data Sheet
Designed specifically for operation on a beam pumped oil well, the Texsteam Series 1200 Chemical Injection pumps are positive displacement type pumps powered by direct connection to the movement of a walking beam, rod line or rocker arm. The connection is made by a length of nominal pipe, or a wire line. The unit pumps on the upstroke of the beam action. On the downstroke, the injector arm returns to its set position. The ratchet mechanism is housed in a precision-bored, heavy cast gray iron case and is submerged in oil for long life.
Download Data Sheet
Designed specifically for operation on a beam pumped oil well, the Texsteam Series 1200 Chemical Injection pumps are positive displacement type pumps powered by direct connection to the movement of a walking beam, rod line or rocker arm. The connection is made by a length of nominal pipe, or a wire line. The unit pumps on the upstroke of the beam action. On the downstroke, the injector arm returns to its set position. The ratchet mechanism is housed in a precision-bored, heavy cast gray iron case and is submerged in oil for long life.
Download Data Sheet
Pressbolt supports the customers on the production of special pieces as per their own drawings, in all steel grades, thanks to advanced CNC machines.
Download Data Sheet
Pressbolt has developed also the manufacturing of hex plugs; Pressbolt can manufacture these plug as per Customer’s drawings and specifications, in different type of materials ( carbon/stainless steel and super alloys).
Download Data Sheet
To complete the range of customers’ requirements, Pressbolt supplies bolts (Hex head bolts, round head socket cap-screws) made of all type of materials.
Download Data Sheet
Pressbolt manufactures threaded anchor bolts – bent anchor bolts (plain finish and galvanized) as per Customer’s request in different diameters and materials.
Anchor bolts are supplied equipped with relevant nuts and washer as per Customer’s requirements.
Download Data Sheet
Pressbolt can supply any type of nut (hexagonal, cylindrical, spherical, as per drawing) to all kind of materials and from the smallest size (1/4” – M6) to the largest (7” – M180), in order to fit with relevant stud bolts/screws.
Download Data Sheet
studbolts-nuts-special fasteners
Pressbolt S.r.l. produces standard and special bolting (fully threaded stud bolts, nuts, bars, etc), special pieces manufactured to customer’s drawings. Standards; DIN ASTM, ASME, and UNI. Our customers counts on a wide range of 85.000 items ready on stock made of most common material like ASTM A193 B7,A320 L7,A193 B8,A193 B8M,A453 660,A182 F51,A182 F55 for stud bolts and corresponding materials for nuts. For more than 30 years Press bolt has been specializing in manufacturing stud bolts, nuts and special fasteners
Download Data Sheet
• 2″ NPT inlet and outlet standard
• Pilot operated design provides tight operating band
• Optional inlet and outlet connections available
• Inlet gas pressures from 40 PSIG to 130 PSIG
• Set points from -0.5 in.W.C. to 69.2 in.W.C.
• Optional flow plates to meet specific flow
requirements
• Fully field serviceable
• Optional pilot and sense line gauges
• System purge and field test capability available
• Conforms to the latest ATEX Directive
Download Data Sheet
• Sizes 1″ through 4″(End line);
• Sizes 1″ (DN 25) through 12″ (DN 300)(Vent line)
• Listed by Underwriters Laboratories in 1″ and 2” sizes
• Suitable for use with vapors equivalent to NEC 500
Group D, IEC Group IIA
• Vertically mounted, parallel plate-type flame arrester
• Protects against fire
• Minimizes pressure drop under normal operating
conditions
• Easy inspection and maintenance
• Factory inspected prior to shipment
• Available in Aluminum and Stainless Steel
Download Data Sheet
• Sizes 2″ (DN 50) through 24″ (DN 600)
• Settings achieved by weight loading
• Reduces costly evaporation losses
• Leakage rate of less than 1 SCFH of air at 90% of set point
• Patented, FEP film “Air-Cushioned Seating”
• Low-leak pallet design – certified test reports
• Conforms to the latest ATEX Directive
• Available in Aluminum, Stainless Steel, Carbon Steel,
and Alloy C / C27619800 – Pipe-Away Pressure Relief Vent
Download Data Sheet
• Sizes 2″ (DN 50) through 12″ (DN 300)
• Conforms to the latest ATEX Directive
• Available in Aluminum, Ductile Iron, Stainless Steel,
Carbon Steel, and Alloy C / C276
SERIES -STYLE
9540 – End-of-Line Pressure/Vacuum Breather Vent
19540 – Pipe-Away Pressure/Vacuum Breather Vent
9240 – End-of-Line Vacuum Relief Vent
19240 – Side Mount Vacuum Relief Vent
9800 – End-of-Line Pressure Relief Vent
19800 – Pipe-Away Pressure Relief Vent
Download Data Sheet
The JC Fully Welded Ball Valve gives it maximum strength at minimum weight as well as maximum resistance both to pipeline pressures and stresses. The compact, spherical design also eliminates body flanges, thus reducing overall size and leak paths.
JC welded body ball valves are used mainly in Gas transmission and distribution pipeline (Mid-stream), typical for underground and buried installation.
•Types: Full bore & Reduced bore
Download Data Sheet
Bodies and covers are high quality cast and afterwards precisely machined, directing the attention to prevent stress concentration. The design characteristic of check valves is the unobstructed passageway, with a full-opening when required.
• Sizes: 2” to 36”
• Types: Bolted Bonnet & Pressure seal
• Materials :Body: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex,Special Alloys,… Other materials under request
TRIM: 316, 410, MONEL,… Other materials under request
Download Data Sheet
The stems of JC globe valves are forged from one piece and ACME threaded, then
mechanized and finally provided with a smooth finishing in order to minimize friction.
• Sizes 2” to 16”
• Types :Bolted Bonnet & Pressure seal
• Class:150 to 2500
• Materials Body: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex,
Trim: 316, 410, MONEL,… Other materials under request
Download Data Sheet
Gate valves serve as efficient on-off valves with flow in either direction. In such a design, a wedge slides cross a general passageway in order to control fluid flow (like a sliding gate – hence, the name).
• Bolted Bonnet (from Class 150 up to Class 2500 from 2’’ up to 36’’)
Materials:Body: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex,
Trim: 316, 410, MONEL
• Pressure Seal (from Class 900 up to Class 2500 from 2’’ up to 20’’)
Materials :Body: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex,
Trim: 316, 410, MONEL
Download Data Sheet
A ball valve is a shut-off valve that controls the flow of a liquid or gas by means of a rotary ball having a bore. By rotating the ball a quarter-turn (90 degrees) around its axis, the medium can flow through or is blocked.
• Metal seated ball valves • Trunnion mounted ball valves • Floating ASME ball valves • Special constructions
• Floating 3-way ball valves • Monoblock valves • 3 piece forged ball valves • Semi-trunnion ball valves • Floating EN-DIN ball valves
Download Data Sheet
The type 2900 pilot-operated safety relief valve combines the advantages of two products into one— the 1900 safety relief valve and the 3900 POSRV. The 2900 POSRV can replace spring-loaded relief valves without requiring modified outlet piping.
Specifications :
• Inlet Sizes: 1″ through 12″
• Outlet Sizes: 2″ through 16″
• Orifice Sizes: D through W
• Set Pressure Range: 15 to 6250 psig
• Temperature Range: -40°F to 505°F
• Materials: Stainless steel pilot with carbon steel main valve and SS trim
• Certification: ASME Section VIII, PED and SQL
Download Data Sheet
The type 3900 pilot-operated safety relief valve is a non-flowing design available in a modulating or pop-action pilot.The 3900 POSRV is suitable for the overpressure protection of many pressurized systems and vessels in the chemical, petrochemical, paper mill, oil and gas production and transmission
Specifications :
• Inlet Sizes: 1″ through 10″
• Outlet Sizes: 2″ through 10″
• Orifice Sizes: Fourteen sizes- D throughT
• Set Pressure Range: 15 to 6250 psig
• T emperature Range: -40°F to 505°F
• Materials: Stainless steel pilot with carbon steel main valve and SS Trim
• Certification: ASME Section VIII,PED and SQL
Download Data Sheet
The highly adaptable type 1900 safety relief valve meets numerous application requirements.The type 1900-UM valve is capable of flowing liquid, gas or steam with no adjustment required to switch between different media with the same set
pressure.
Specifications :
• Inlet Sizes: 1″ through 12″
• Inlet Ratings: ANSI Class 150 through 2500
• Outlet Sizes: 2″ through 16″
• Outlet Ratings: ANSI Class 150 and 300
• Orifice Sizes: D through W
• Set Pressure Range: 4 psig to 6250 psig
• Temperature Range: -450°F to 1500°F
• Materials: Cast carbon steel body with stainless steel trim
• Certification: ASME Section III and VIII, PED and SQL
Download Data Sheet
The type 19000 valve is ASME and PED certified. It meets and exceeds API seat tightness performance. The 19000 offers enhanced capacity and blowdown performance on many media types. In most cases, it does not require parts changes to
accommodate different media.
Specifications :
• Inlet Sizes: 1/2″ to 2″
• Outlet Sizes: 1″ through 2 1/2″
• Orifice Sizes: .019″ through .567″
• Set Pressure Range: 5 psig to 15000 psig
• Temperature Range: -425°F to 1100°F
• Certification: ASME Section III and VIII,PED and SQL
Download Data Sheet
• Sizes :2-1/2” through 36” (65 mm through 900 mm)
• Working pressure : ASME Class 150, 2-1/2” through 36” (65 mm through 900 mm)
: ASME Class 300, 2-1/2” through 24” (65 mm through 600 mm)
: ASME Class 600, 3” through 12” (80 mm through 300 mm)
• Operating Temperatures: Up to 1000º F (538º C)
FEATURES AND BENEFITS
• Two Body Styles-Flangeless wafer and threaded lug styles are available.
• Heavy-duty Disc
• Thrust Bearing/Disc Spacer
• Internal Stop
• Deep Stuffing Box for Extended Life
• Lower Stem Disc Spring
• Disc Design Reduces Seat Wear
• Positively Retained Stem Prevents Blowouts
• Three Seat Designs
Download Data Sheet
Provable zero-leakage, double block-and-bleed plug valve for oil and gas applications.
ADVANTAGES:
• Twin seal Valves hold with consistent zero-leakage
• Meter Stations
• Tank-Side Isolation Maintains Product Integrity
• Hydrant Isolation
• Fuel Loading Hazards are Eliminated
Download Data Sheet
Cameron’s ORBIT® valves are ideal for applications when zero leakage and frequent
operation are demanded. They are used globally in gas processing plants using molecular
sleve systems in switching service.
STANDARD FEATURES:
• Single-seat Design
• Injectable Packing
• Top-entry Design
• Optimum Flow
• Dual Stem Guides
• Self-cleaning
• Low-torque Operation
• Wear-resistant Hard Facing on Core
Download Data Sheet
The end-entry ball valve for oil and gas, and product pipelines is the choice for gas
distribution and other specialized applications.
FEATURES AND BENEFITS:
• Pressure-Actuated Seats
• Secondary Seat Sealant Injection
• Field Repairable
• Indicator Handle
• Positive Double Block-and-Bleed Operation
• Automatic Body Pressure Relief
• Fire-Tested for Safety
• Nace Trim Standard
Download Data Sheet
• Suction Pads: Flat and Bellows Types.
• Ejectors: Basic, In-line and Compact Types.
• Accessories: Nipples, Spring Plungers.
Download Data Sheet
• Air Treatment: Filters, Regulators, Lubricators, FRL, Units, Accessories.
• Pressure Regulators
Download Data Sheet
• Solenoid Valves, Mechanical Valves, Manual Valves, Flow Control Valves, etc.
• Pressure Switches, Vacuum Switches, Silencers, Valve Islands.
• Proportional regulators, Servo Valves ,Flow Control,Servo Valve, Pressure Control.
Download Data Sheet
• Standard Cylinders, Steel Cylinders, Rotating, Cylinders, Cylinder Guides.
• Grippers – Angular & Parallel.
• Proximity Switches.
Download Data Sheet
Materials:
Stainless steel: austenitic, including stabilized grades
Martensitic steels
Ferritic – austenitic steel
High nickel alloys
Applications:
Manufacturers of seamless tubes by extrusion
Free forging
Ring rolling mill
Flange manufacturers
Roller manufacturers
Mud pumps / Frack blocks
Elbows and special components for large piping
Process:
Rolled
Forged
Download Data Sheet
Through its subsidiaries IBF, Tubacex Taylor Accesorios (TTA) and Awaji Stainless, the Group manufactures curved sections and tube fittings in stainless steel, carbon steel and alloys.
TUBACEX range includes the design and manufacturing of welding fittings, curved sections, elbows, tees, reducers, caps (both seamless and welded), from standard to special products, manufactured using cold-drawn or bending processes to complement our extensive range of Tubular Solutions.
Tubacex Group comprehensive production program of special components and fittings is suitable for all types of projects and covers a wide dimensional range from 1/4” to 72”.
Large OD & ID tubes
Large OD & ID fittings
Special components
Machined components
Download Data Sheet
Materials
Mechanical tubes are manufactured in austenitic stainless steel, in particular 304,316, 316 Ti and Duplex.
TUBACEX sells stainless steel mechanical tubes through TSS.
Standards
ASTM
ASME
DIN
EURONORM
ISO
More technical specifications are available upon request.
Download Data Sheet
TUBACEX Group is mainly devoted to the manufacture and sale of seamless stainless steel and high-nickel alloy tubular solutions.Our product portfolio covers dimensional ranges from 3 mm to 219 mm (8”) OD, and up to 42” in the case of mechanical trepanning.
Materials
Stainless steels: austenitics, including stabilized grades.
Alloyed and martensitics steels.
High Nickel alloys.
Ferritic – austenitic: Duplex and Superduplex
Processes
Hot-finished seamless stainless steel tubes.
Cold-finished seamless stainless steel tubes.
Welded and drawn pipes.
Mechanical trepanning.
Big OD Thin Wall Seamless Pipes.
Standards
ASTM, ASME, DIN, EURONORM, ISO, BS, AFNOR, JIS, GOST
More technical specifications are available upon request.
Download Data Sheet
PRODUCT APPLICATION AREAS: Chillers, Air Conditioning, Refrigeration & Automobile Brake Lines
Alloys: Copper, Copper Nickel 95/5, 90/10, 80/20, 70/30
Related Standards: ASTM B 111, BS EN 12449, DIN 74234
Size range:OD: 4.76 mm to 22.00 mm WT: 0.30 mm to 1.50 mm
Download Data Sheet
Specialised Copper Alloy Wire & Rods Products
PRODUCT APPLICATIONS: Fasteners, Rivets, Jewelry, Spectacles, EDM Wires,
Musical Instruments, Electronic Items, Ship Building, Automobile, Nuts, Bolts,
Screws, Architectural Application
Related Standards: ASTM B 134/ EN 12166
Size Range:0.80 mm to 15.00 mm
Phosphor Bronze Alloys
PRODUCT APPLICATIONS: Springs, Plated Wire, Musical Instruments,Washers, Connectors, Plated Wire, Anchor Wire for tooth Brush
Related Standards:ASTM B 134/ EN 12166
Size Range:0.80 mm to 15.00 mm
Nickel Silver Alloys
PRODUCT APPLICATIONS: Springs, Relays, Musical Instruments, Measuring, Equipment, Ammunition, Electrical, Writing Instruments, Brazing
Related Standards:ASTM B 206/ ASTM B 151/ EN 12166
Size Range:0.80 mm to 15.00 mm
Download Data Sheet
Copper & Copper Alloy
Cast, Extruded and Drawn Semis (Hollows, Sections, Profiles and Rods.
Download Data Sheet
PRODUCT APPLICATION AREAS: Heat Exchangers, Condensers & Chillers.
Alloys: Copper, Copper Nickel 95/5, 90/10, 70/30, Admiralty Brass, Aluminium Brass
• Low Finned tubes
• Enhanced Surface Finned Tubes
Multimetals Manufacture the above two kinds of Finned Tubes with 19 & 26 fins per inch
Download Data Sheet
Copper Tubes
PRODUCT APPLICATION AREAS:
Defense, Refrigeration, Air conditioning, Plumbing, Engineering application,
Electrical conductors and Bus bars.
GUIDE TO SELECTION OF TUBE MATERIAL: Clear river, Lake or Canal water
a. Dissolved salts less than 500 ppm
b. Chloride less than 10 ppm
c. H2S or ammonia nil
d. Organic fats nil
e. Suspended solids less than 5 ppm
Permissible average velocity of water 0.8-1.0 meter / sec
Aluminium Brass Tubes
PRODUCT APPLICATION AREAS:
Heat Exchangers, Refineries Power Plants, Desalination Plants,
Ship Building & Ship Repairs, Condensers, Ferrules, Distillers.
GUIDE TO SELECTION OF TUBE MATERIAL: Clear river, Lake or Canal water -
a. Dissolved salts more than 2000 ppm
b. Chloride less than 20 ppm
c. H2S and Ammonia is less than 1 ppm
d. Suspended solids less than 25 ppm
e. For temperature more than 200 degree C and less than 450 degree C
Permissible average velocity of water 2.0 to 2.5 meter / sec
Download Data Sheet
• 496 Series Rotary Limit Switch
• Model 4411Electro-Pneumatic Transducer
• Model 78 Air Filter Regulator
• Model BR200 / BR400 High Capacity Volume Booster Relays
Download Data Sheet
• Characteristics:Linear or equal percentage obtained through the relevant cam setting.
• Options:bypass,customized characteristic
• Signals: 4 - 20 mA,split range; Action:Direct and reverse action
• Multi-lobe cam
• Simple zero and span adjustments
• Corrosion resistant materials
• Fully enclosed
• FM, CSA, ATEX approvals
Download Data Sheet
• Communication Platform:HART & FF
• Signal - Supply - Features:
• 4-20 mA control signal,Loop powered (9Vdc @ 20 mA)
• Supply pressure: 20 - 150 psi (1.4 - 10 bar)
• Operating Temperature:-40 °C to 85°C (-40°F to +185°F)
• Single or double-acting
• local or remote-mount capable
• Built diagnostics-in position transmitter and switches/push buttons
• Non-contact travel sensor
Download Data Sheet
• Communication Platform:HART
• Signal - Supply - Features:
• 4-20 mA control signal (ASD) 24 Vdc, (DSD), 4-20 mA and 24Vdc (4-wire device A/DSD)
• Supply pressure: 20 - 120 psi (1.4 - 8 bar)
• Operating Temperature:-40°C to 85°C (-40°F to +185°F)
• Single Acting
• Local, remote and automatic partial stroke test
• Local or remote-mount capable
• Built diagnostics-in position transmitter and switches/push buttons
Download Data Sheet
Range: 14" through 120"(355 through 3048 mm)
Ratings and Connections:1) flanged: ANSI 150 - 2500 UNI-DIN 10 – 100; Screwed: NPT-F (1 1/2", 2"); Welded
Body Materials: Carbon steel, stainless steel, chrome-moly
Displacer Materials: stainless steel, other materials on request
Torque Tube Materials: lnconel, stainless steel, other materials on request
Electronic lnstrument: HART protocol,4 - 20 mA signal ATEX, FM, FMc, JIS, GOST and CSA
Download Data Sheet
• Sizes: 1" through 12"(25 through 300 mm)
• Ratings and Connections: Flanged: ANSI 600 - 2500 UNII-DIN 100 - 400;Welded: BW or SW
• Body Materials:Carbon steel,stainless steel chrome-moly
• Actuators: 1) Model 87 /88- multi-spring-opposed diaphragm or 51/52/53 Piston cylinder
• Trims:axial flow technology,multi-stage, cage-guided,anti-cavitation trim Class VI available on request
Download Data Sheet
Sizes: 3" through 48" (80 through 1200 mm)
Ratings: ASME CL150 - CL1500 Wafer and lug for mounting between flanges: ANSI 150-600
Connections: Lugged, Raised Face Flanged, RTJ Optional
Body Materials: Carbon steel, Stainless steel, Low Temperature Carbon Steel
Trim: Triple Offset
Seat Leakage: Class IV, Class V & VI (Optional)
Download Data Sheet
• Designed with EF Seal (Emission Free Packing) with emissions rated less than 500ppm up to 750,000 cycles.
• Sizes: 1" to 16".
• Rating: Flanged: - ANSI 150 - 600; Flangeless: - ANSI 150- 600, UNI-DIN 10-100; Screwed: - NPT (1 through 2")
• Body: CS / SS / High Nickel Alloy
• Actuator: Model 35 spring diaphragm, 70 Series Cylinder
• Trim: Eccentric Rotary Plug
Download Data Sheet
Meets demanding requirements of high-pressure drop applications and wide temperature fluctuations
Sizes: 2" to 24"
Rating: Flanged: ASME 150 – 2500 ; Welded: BW / SW ; Screwed: NPT 2"
Body: CS/ SS / Chrome-Moly
Actuator: Model 87 /88 multi-spring diaphragm & Piston cylinder actuators
Trim: Balanced cage-guided Trim,Lo-dB , anti-cavitation, VRT trims, Single and multiple cages are available
Download Data Sheet
Well suited for control loops with typical service conditions.
Sizes: 3/4" to 8".
Rating: Flanged: ASME 150- 2500
Connection type :Welded: BW / SW & Screwed: NPT 3/4" to 2"
Body: CS / SS / Chrome-Moly
Actuator: Model 87 /88 multi-spring diaphragm
Trim: Single seat plug top guided.
Lo-dB and anti-cavitation trims, single or double stage are available.
Download Data Sheet