• 2″ NPT inlet and outlet standard • Pilot operated design provides tight operating band • Optional inlet and outlet connections available • Inlet gas pressures from 40 PSIG to 130 PSIG • Set points from -0.5 in.W.C. to 69.2 in.W.C. • Optional flow plates to meet specific flow requirements • Fully field serviceable • Optional pilot and sense line gauges • System purge and field test capability available • Conforms to the latest ATEX Directive Download Data Sheet

• Sizes 1″ through 4″(End line); • Sizes 1″ (DN 25) through 12″ (DN 300)(Vent line) • Listed by Underwriters Laboratories in 1″ and 2” sizes • Suitable for use with vapors equivalent to NEC 500 Group D, IEC Group IIA • Vertically mounted, parallel plate-type flame arrester • Protects against fire • Minimizes pressure drop under normal operating conditions • Easy inspection and maintenance • Factory inspected prior to shipment • Available in Aluminum and Stainless Steel Download Data Sheet

• Sizes 2″ (DN 50) through 24″ (DN 600) • Settings achieved by weight loading • Reduces costly evaporation losses • Leakage rate of less than 1 SCFH of air at 90% of set point • Patented, FEP film “Air-Cushioned Seating” • Low-leak pallet design – certified test reports • Conforms to the latest ATEX Directive • Available in Aluminum, Stainless Steel, Carbon Steel, and Alloy C / C27619800 – Pipe-Away Pressure Relief Vent Download Data Sheet

• Sizes 2″ (DN 50) through 12″ (DN 300) • Conforms to the latest ATEX Directive • Available in Aluminum, Ductile Iron, Stainless Steel, Carbon Steel, and Alloy C / C276 SERIES -STYLE 9540 – End-of-Line Pressure/Vacuum Breather Vent 19540 – Pipe-Away Pressure/Vacuum Breather Vent 9240 – End-of-Line Vacuum Relief Vent 19240 – Side Mount Vacuum Relief Vent 9800 – End-of-Line Pressure Relief Vent 19800 – Pipe-Away Pressure Relief Vent Download Data Sheet

The JC Fully Welded Ball Valve gives it maximum strength at minimum weight as well as maximum resistance both to pipeline pressures and stresses. The compact, spherical design also eliminates body flanges, thus reducing overall size and leak paths. JC welded body ball valves are used mainly in Gas transmission and distribution pipeline (Mid-stream), typical for underground and buried installation. •Types: Full bore & Reduced bore Download Data Sheet

Bodies and covers are high quality cast and afterwards precisely machined, directing the attention to prevent stress concentration. The design characteristic of check valves is the unobstructed passageway, with a full-opening when required. • Sizes: 2” to 36” • Types: Bolted Bonnet & Pressure seal • Materials :Body: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex,Special Alloys,… Other materials under request TRIM: 316, 410, MONEL,… Other materials under request Download Data Sheet

The stems of JC globe valves are forged from one piece and ACME threaded, then mechanized and finally provided with a smooth finishing in order to minimize friction. • Sizes 2” to 16” • Types :Bolted Bonnet & Pressure seal • Class:150 to 2500 • Materials Body: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex, Trim: 316, 410, MONEL,… Other materials under request Download Data Sheet

Gate valves serve as efficient on-off valves with flow in either direction. In such a design, a wedge slides cross a general passageway in order to control fluid flow (like a sliding gate – hence, the name). • Bolted Bonnet (from Class 150 up to Class 2500 from 2’’ up to 36’’) Materials:Body: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex, Trim: 316, 410, MONEL • Pressure Seal (from Class 900 up to Class 2500 from 2’’ up to 20’’) Materials :Body: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex, Trim: 316, 410, MONEL Download Data Sheet

A ball valve is a shut-off valve that controls the flow of a liquid or gas by means of a rotary ball having a bore. By rotating the ball a quarter-turn (90 degrees) around its axis, the medium can flow through or is blocked. • Metal seated ball valves • Trunnion mounted ball valves • Floating ASME ball valves • Special constructions • Floating 3-way ball valves • Monoblock valves • 3 piece forged ball valves • Semi-trunnion ball valves • Floating EN-DIN ball valves Download Data Sheet

The type 2900 pilot-operated safety relief valve combines the advantages of two products into one— the 1900 safety relief valve and the 3900 POSRV. The 2900 POSRV can replace spring-loaded relief valves without requiring modified outlet piping. Specifications : • Inlet Sizes: 1″ through 12″ • Outlet Sizes: 2″ through 16″ • Orifice Sizes: D through W • Set Pressure Range: 15 to 6250 psig • Temperature Range: -40°F to 505°F • Materials: Stainless steel pilot with carbon steel main valve and SS trim • Certification: ASME Section VIII, PED and SQL Download Data Sheet

The type 3900 pilot-operated safety relief valve is a non-flowing design available in a modulating or pop-action pilot.The 3900 POSRV is suitable for the overpressure protection of many pressurized systems and vessels in the chemical, petrochemical, paper mill, oil and gas production and transmission Specifications : • Inlet Sizes: 1″ through 10″ • Outlet Sizes: 2″ through 10″ • Orifice Sizes: Fourteen sizes- D throughT • Set Pressure Range: 15 to 6250 psig • T emperature Range: -40°F to 505°F • Materials: Stainless steel pilot with carbon steel main valve and SS Trim • Certification: ASME Section VIII,PED and SQL Download Data Sheet

The highly adaptable type 1900 safety relief valve meets numerous application requirements.The type 1900-UM valve is capable of flowing liquid, gas or steam with no adjustment required to switch between different media with the same set pressure. Specifications : • Inlet Sizes: 1″ through 12″ • Inlet Ratings: ANSI Class 150 through 2500 • Outlet Sizes: 2″ through 16″ • Outlet Ratings: ANSI Class 150 and 300 • Orifice Sizes: D through W • Set Pressure Range: 4 psig to 6250 psig • Temperature Range: -450°F to 1500°F • Materials: Cast carbon steel body with stainless steel trim • Certification: ASME Section III and VIII, PED and SQL Download Data Sheet

The type 19000 valve is ASME and PED certified. It meets and exceeds API seat tightness performance. The 19000 offers enhanced capacity and blowdown performance on many media types. In most cases, it does not require parts changes to accommodate different media. Specifications : • Inlet Sizes: 1/2″ to 2″ • Outlet Sizes: 1″ through 2 1/2″ • Orifice Sizes: .019″ through .567″ • Set Pressure Range: 5 psig to 15000 psig • Temperature Range: -425°F to 1100°F • Certification: ASME Section III and VIII,PED and SQL Download Data Sheet

• Sizes :2-1/2” through 36” (65 mm through 900 mm) • Working pressure : ASME Class 150, 2-1/2” through 36” (65 mm through 900 mm) : ASME Class 300, 2-1/2” through 24” (65 mm through 600 mm) : ASME Class 600, 3” through 12” (80 mm through 300 mm) • Operating Temperatures: Up to 1000º F (538º C) FEATURES AND BENEFITS • Two Body Styles-Flangeless wafer and threaded lug styles are available. • Heavy-duty Disc • Thrust Bearing/Disc Spacer • Internal Stop • Deep Stuffing Box for Extended Life • Lower Stem Disc Spring • Disc Design Reduces Seat Wear • Positively Retained Stem Prevents Blowouts • Three Seat Designs Download Data Sheet

Provable zero-leakage, double block-and-bleed plug valve for oil and gas applications. ADVANTAGES: • Twin seal Valves hold with consistent zero-leakage • Meter Stations • Tank-Side Isolation Maintains Product Integrity • Hydrant Isolation • Fuel Loading Hazards are Eliminated Download Data Sheet

Cameron’s ORBIT® valves are ideal for applications when zero leakage and frequent operation are demanded. They are used globally in gas processing plants using molecular sleve systems in switching service. STANDARD FEATURES: • Single-seat Design • Injectable Packing • Top-entry Design • Optimum Flow • Dual Stem Guides • Self-cleaning • Low-torque Operation • Wear-resistant Hard Facing on Core Download Data Sheet

The end-entry ball valve for oil and gas, and product pipelines is the choice for gas distribution and other specialized applications. FEATURES AND BENEFITS: • Pressure-Actuated Seats • Secondary Seat Sealant Injection • Field Repairable • Indicator Handle • Positive Double Block-and-Bleed Operation • Automatic Body Pressure Relief • Fire-Tested for Safety • Nace Trim Standard Download Data Sheet